Mayer Motorsport

Sensor testing
Logistics
Electrical testing
Setup of switch panels, test boxes, headlights, steering wheels etc.
Creating CAD drawings and parts lists
Support with the planning
Cable manufacture motorsport
Cable manufacture industry

Sensor testing

We have a large number of options to test various sensors. Up to 200 bar can be applied to pressure sensors; up to 350°C to temperature sensors. The measured values will then be compared with the corresponding reference sensors. Other sensors such as level, LVDT, speed or acceleration sensors can also be tested through measurement setups and the output signals can be shown.

Logistics

Our large warehouse allows us to fall back on a very large material master. If required, we will take over the entire materials procurement and we are also able to store the parts temporarily. Your logistics effort will be reduced; you will receive complete solutions from us – everything from one source!

Electrical testing

We use several test computers in our company that allow us to test the different requirements. We are able to test the wiring in the low voltage range up to 48V for its proper function and carry out an insulation or short circuit test in the high voltage range up to 1500V DC. By measuring the capacitance, we can tests one-sided shields or twisted cables. For low-resistance applications, we will also perform 4 point measurements. The independent programming of the test programs also allows us to test specific customer requirements.

Setup of switch panels, test boxes, headlights, steering wheels etc.

Thanks to years of experience in the manufacturing of cables, we have set up many different products. Our committed staff members do not shy away from tackling new products or areas! We are open for everything and anything

Creating CAD drawings and parts lists

We can also prepare all the documents. This includes the CAD drawings with detailed parts lists, circuit diagrams or wiring lists or change management.

Support with the planning

We assist you in designing the best possible wiring! We will help you to realise a requirement or just an idea. We can analyse different solutions and create first test models. No project is too complex - try us

Cable manufacture motorsport

Years of experience with the wiring in motorsport will guarantee 100 % perfect products; we also use only the highest quality materials! We guarantee quality products with the highest reliability! Thanks to our very large inventory, we are able to react quickly.

Cable manufacture industry

We build all kinds of wiring, components or complete solutions. No project is too difficult for us! Whether it involves a model setup or a make-to-order production, a pilot series or small series – you will get the perfect wiring for your application.

References

Racing series

  • ADAC GT-Masters
  • DTM
  • FIA GT3
  • FIA GT4
  • FIA Rallycross
  • FIA WEC / LMP1
  • GT Pro
  • VLN

Maximum quality for maximum performance

100% quality
100% water resistance
100% heat resistance

The Mayer Motorsport company is a specialist in the development of complex cable systems. Whether it is for the highest loads in motor sport or special applications in the industry, our cable harnesses withstand any load. We are more than happy to support you with the development of the first prototypes as well as their further development to become marketable. The series production of wiring harnesses is also not a problem due to semi-automated workflows. Of course, all processes are carried out just-in-time and will therefore offer you a high degree of flexibility. We will gladly manage the logistic activities such as the material procurement. If you want to see for yourself all the advantages of our company, please do not hesitate to contact us.

"We don't make compromises when it comes to the quality of our products!
We offer maximum perfection and maximum performance."

  • Manufacturing
  • Template
  • Crimping tool
  • Cable harness
  • Testing
  • Quality
  • Cutting

Mayer-Motorsport - Perfect teamwork for your success

2004
Founding in Litzlohe. Manufacture of the first motorsport line circuits- 3 staff members
2006
Opening of a second production site in Neumarkt - 10 staff members
2010
Merging of both locations to a 400 m² large production hall - 15 staff members
2012
Purchase of a 700 m² company building and reconstruction
2013
Moving into the new premises - 21 staff members
2015
Procurement of a second HV test computer and measurement equipment for the sensor test
2018
Complete conversion to LED-lights
2019
New test system Adaptronic high-voltage was put into operation; Changeover to new ergonomic tables for employees has been implemented
2020
X-ray system Yxlon Cheetah EVO 2020 was put into operation; Optimization and extension of the quality checks by EVO Cam II digital microscope with digital zoom and optical magnification of up to 760x to reveal even the hidden details
2021
With the introduction of the new Trotex Speedy 100 laser engraving system, it is now possible to engrave all connectors or sensors

Contact us

Obviously, as a wiring specialist it is important to us to maintain good contacts to our customers. Why don't you just get to know us or send us your special request?
We will contact you immediately.

Kontakt

qrcode
Mayer Motorsport e.K.
Rosenbergstr. 9
92348 Berg
Office Hours: 
Monday - Thursday
07:00-16:00
Friday
07:00-14:00